Polyclear is a unique and tough hard surface sealer that provides maximum protection. It provides a clear, hard finish for timber and concrete.
Suitable for interior timber, including; doors, trim work, furniture, window frames and paneling. Suitable for timber and concrete internal floors. Not suitable for surfaces where water can form puddles as it may appear milky until water dries.
Can be tinted to many opaque colours.
16sqm/L on smooth surfaces (10sqm/L on rough, untreated surfaces).
Ensure surfaces to be painted are clean and free of dust, dirt, mould, grease, contaminants and any flaking or blistering finishes. Fill any cracks or holes with a suitable filler. Previously finished surfaces need to be cleaned with an etch cleaner, such as Gloss Off, to ensure adhesion. Three coats are recommended for floors, two coats are recommended for all other surfaces.
Stir well with a broad flat stirrer to a relatively even consistency. Do not apply in temperatures below 10ºC or above 35ºC. When applying in hot and windy conditions or when painting very absorbent surfaces, dampen the surface with water before painting or thin the paint with 100ml of water per litre.
ECOLOUR™ Polyclear can be applied by roller, brush or spray gun. Apply 1 generous coat making sure the surface is covered thoroughly and evenly. Touch dry in 30 minutes. Allow 2 hours before applying top coats or longer in humid, cold or damp conditions.
Care and Maintenance
Polyclear will provide a clear, scrubbable surface that can be wiped clean with a damp cloth. Surface scratches can be repaired by cutting back and re-coating.